Press wood pallet machine is also called wood pallet machine, wood pallet molding machine, which is a new type of one time forming machine. This machine is a new type of the press wood pallet machine, double-mould press wood pallet machine.
Compared with the single-mould wood pallet machine, the capacity is much higher than the single one, and more economical if you want large capacity. The press wood pallet making machine meets the requirement of environmental protection. It can help you to recycle raw materials, such as wood chips, waste wood pallets, waste wood, timbers, kraft paper, straw, bamboo, even if plastic etc. That can help you solve the problem of the environment and also make profits.
Advantages of press wood pallet machine:
- High precision
- High durability
- High capacity
- High economic
- High automation
- Better molds design
We tested and pushed down many solutions and patterns and finally adopt the three-beam four-column structure. Then we realize below,
- The four-column guide device assures the precision of closing moulds and the stability of pressing during the working of press machine.
- The upper mold is integrated with the “Sliding beam”, which doubles the strength, stability and precision.
- High precision makes pallets surface smooth without burrs.
Double-mould press wood pallet machine parameters
| Model | PM 1000 |
| Voltage | 220 V/380 V, 50 Hz, Three-phase |
| Capacity | 260 pieces/day (24 hours) |
| Power | 22 kW |
| Hydraulic cylinder diameter | 350 mm |
| Hydraulic cylinder quantity | 4 pieces |
| Pressure | 0-1000 tons (adjustable) |
| Shaping cycle | 300 seconds |
| Weight | 30 tons |
| Dimension | 4200*2200*3500 mm |
| Remarks: it includes one set normal mould along with one set machine. | |